Click on a photo to enlarge.
Example of lifting and Leveling with Polylevel, and sealing joints and cracks with NexusPro.
This is a walkway at an apartment complex. The owner wanted to fix the trip hazard. But, a tear out and repour were expensive. We were able to level the concrete with PolyLevel and then seal the crack with NexusPro!
The driveway was lifted with PolyLevel Foam and the cracks and joints were sealed with NexusPro Joint Sealant.
This driveway was in need of repair after years of water seeping below the slabs it eventally began to fail with visible cracking @ the surface. Luckily only a few cracks were @ the surface but the voids below needed attention to stabilize the concrete above. We used Polylevel (polyurethane foam) to lift and level the concrete slabs, followed by NexusPro (crack sealant) to ensure water will not seep through cracks causing additional erosion.
This customers back patio was sinking and cracking. Our team went in and lifted and leveled the back concrete slab back to its original position and sealed all cracks.